To see the details of any product please click on the name of the product or its picture.
To download all the information of the whole products in this group click on the following link.
New Generation
* Alle Datei in PDF Format
 Technical Data:
- Generator: Synchronous
- Continuous power: 650 W
- Max. Power: 800 W (S2 15 Min.)
- Rated voltage: 230 V / 1 ~
- Rated current: 2,8 A / 1 ~
- Frequency: 50 Hz
- Drive engine design: 1 Zylinder, 2-stroke air cooled
- Displacement: 63 cm³
- Max. power: 1,1 KW / 1,5 PS
- Fuel: Mixture 1:50 (2%)
- Tank capacity: 4 l
- Consumption at 2/3 load: approx. 0,7 l/h
- Protection type: IP 23
- Spark plug: NGK BPR5ES
Weight: 22,5 kg
Packing dimensions: 41 x 34 x 35 cm
SB 401/1
SB 501/1
SB 701/1
SB1020/1W
SB1020/1D
SB 1625/1D
SB 1625/1 W
 Technical data:
- Mains: 230 V ~ 50 Hz
- Power: 1600 watts
- Idle speed no: 4.200 min-1
- Saw blade: ? 305 x ? 30 x 3,2 mm
- No. of teeth: 60
- Turning range: -45° 0 +45°
- Panels max.: 330 mm
- Mitre cut: 0 ° to 45 ° to the left
- Cutting width at max 45°: 215 x 102 mm
- Cutting width at max 90°: 330 x 102 mm
- Cutting width at 2x45°: 215 x 65 mm
(Double mitre cut)
TPR 180
 Technical Data:
- Working Table: 500 x 385 mm
- 2 -phase motor: 230 V ~ 50 Hz
- Power: 600 watts
- Idle speed no: 2950 min -1
- Cutting depth max: 90° - 25 / 45° - 15 mm
- Cutting length max. 15 mm thickness: 360 mm
- Cutting length max: 430 mm
- Mitre cut: 0° - 45 °
- Size of diamond disc: ? 180 x ? 25,4 mm
- Insulation class: IP 54
STR 250
 Technical data:
- Working Table: 660 x 510 mm
- Single phase motor: 230 V ~ 50 Hz
- Power: 1100 watts
- Idle speed n0: 2950 min-1
- Cutting depth 90°: max. 65 mm
- Cutting depth 45°: max. 48 mm
- Cutting length until 38 mm: max. 620 mm
- Cutting length over 38 mm: max. 550 mm
- Mitre cut: 0° - 45°
- Diamond disc: ? 250 x ? 25,4 mm
- Insulation class: IP 54
- Dimension of article: 1200 x 760 x 1040 mm
Weight: 56,50 kg
Packing dimensions: 102,5 x 60,5 x 47 cm
ASA 550/100
 Technical data:
- Main: 230 V ~ 50 Hz
- Power: 550 watts
- Idle speed n0: 2900 rmp
- Collection bag: 65 litre
- Extraction adaptor: ? 100 mm
- Air capacity: 1150 m³/h
- Vacuum: max. 7000 Pa
- Tube length: 2,5 m
- Unit size: 900 x 500 x 1550 mm
Weight: 25,70 kg
Packing dimension: 89,5 x 54 x 44 cm
BK 315/400
 Technical data:
- Motor type: Induction motor
- Table size: 790 x 580 mm
- Working height: approx. 840 mm
- Size of additional side table: 790 x 400 mm
- Machine size without addition table: 1100 x 960 x 1150 mm
- Power: 2200 Watts / S6 40%
- Idle speed: 2860 min-1
- Mains: 400 V ~ 50 Hz
- Cutting height: 90°: 83 mm, 45°: 60 mm
- Carbide tipped saw blade: ? 315 x ? 30 x 3,6 mm, 24 teeth
- Range of saw blade: 0° - 45°
- Range of sliding carriage: 0° - 45°
- Direct drive
UZS 18/250
 Technical data:
- Mains: 230V ~ 50 Hz
- Power: 1800 watts S6 40%
- Rev./min.: 4300min-1
- String length saw blade: 220 mm
- No. of teeth: 48
- Cutting height max: 73 mm/90°, 50 mm/45°
- Height adjustment: continuously 0 - 73 mm
- Table size: 620 x 455 mm
- Table height: 320 mm
- Saw blade rotation: -2° to 47°
- Dust extraction adaptor: 35 mm
FKS 22/315
 Technical data:
- Mains: 230V ~ 50 Hz
- Power: 2200 W / S6 40%
- Rev./min.: 2860 min-1
- No. of teeth: 24
- Blade tilt: 0 - 45 °
- Saw blade: ? 315 x ? 30 x 3,6 mm
- Cutting height max: 73 mm/90°, 49 mm/45°
- Height adjustment: continuously 0 - 73 mm
- Table size: 800 x 350 mm
- Size of slide table: 1000 x 300 mm
- Slide length: 600 mm
- Saw blade rotation: 0 - 45°
Weight: 65,5 kg
NGS 4,8
 Technical Data:
- Voltage (Charger): 230V~50 Hz
- Charging time: 3-5 h
- Torque setting: 6-fold
- Accu voltage: 4,8 volts
- No load speed: 180 min-1
- Accu capacity: 1,2 Ah
Weight: 1,20 kg
Packing dimensions:
|
